Structural

As a multi-disciplined firm, Ensign offers a unique approach to structural engineering design. This approach provides our clients with a more efficient design process, often resulting in significant time and cost savings. As design codes evolve and become more complex to address seismic and other load conditions for building structures, we have also evolved to meet these critical design challenges. Specialty Structural engineering has become a critical element for many architecturally complex structures, requiring creative ideas and cost-effective solutions to address these issues, both on new facilities, and remodeled structures. Our experience includes all types of structural engineering for both new facilities and specialty engineering, for buildings including:

  • Multi-story office and industrial facilities
  • Tilt-up concrete buildings
  • Elementary through High-school facilities
  • University buildings
  • Churches and Temples
  • State-owned facilities
  • Residential (custom homes, single- and multi-family housing)
  • Retrofit and remodel for seismic loads
  • Settlement analysis and mitigation

Have a question? Please contact David Alter and Scott Roche

Municipal

Ensign provides design support for several Municipalities and Special Service Districts within Utah and surrounding Rocky Mountain States.

  • Utility Systems Layout and Design
  • Water Rights
  • Special Service District Support
  • Pavement Analysis and Management
  • Roadway Improvements
  • Construction Administration

Have a question? Contact Rod Mills or Kelly Crane

K-12

Ensign has completed work for most of the school districts in the state of Utah. We have been hired by several local and national architectural firms to develop site layouts; provide utility, grading and drainage plans; and create structural design plans which specifically address the challenges of K-12 facilities.

  • ADA Compliant Grading Plans
  • Loading Zone Design
  • Auto-turn Analysis
  • Pavement Analysis and Management
  • Utility Designs and Approvals
  • Structural Evaluations
  • Seismic Retrofits
  • Construction Administration
  • Click Here for Additional Information

Have a question? Please contact Rod Mills, Koby Morgan or Brent Morgan

Higher Education

Ensign has completed work for several of the State's higher education facilities. Many of the projects we have worked on have required coordination with other professional disciplines including architects, engineers, and contractors. Our work has included the development of site layouts; utility, grading and drainage plans; and structural design plans.

  • ADA Compliant Grading Plans
  • Parking Lot Analysis
  • Auto-turn Analysis
  • Pavement Analysis and Management
  • Utility Designs and Approvals
  • Structural Evaluations
  • Seismic Retrofits
  • Construction Administration
  • Click Here for Additional Information

Have a question? Please contact Rod Mills or Koby Morgan

Land Development

Ensign's land development group can help you with any size project. We have good relationships with many of local design review agencies and can help you get your project completed on time and within budget.

  • Residential Development
  • Commercial Development
  • Surveying and Plat Mapping
  • Structural Design
  • Click Here for Additional Information

Have a question? Please contact Bob Elder , Brent Morgan or Koby Morgan

Institutional

Ensign has completed designs for various church organizations and healthcare facilities. Many of the projects we have worked on have required coordination with other professional disciplines including architects, engineers, and contractors. Our work has included the development of site layouts utility, grading and drainage plans; and structural design plans.

  • ADA Compliant Grading Plans
  • Parking Lot Analysis
  • Auto-turn Analysis
  • Utility Designs and Approvals
  • Structural Evaluations
  • Seismic Retrofits
  • Construction Administration
  • Click Here for Additional Information

Have a question? Please contact David Jenkins or Brent Morgan

Water Resources

Ensign provides a full line of Hydraulic and Hydrologic design services.

  • Water Systems
  • Sanitary Sewer Sytems
  • Storm Sewer Systems
  • Hydrologic Studies
  • FEMA Analysis
  • Channel Analysis
  • Culvert Performance Analysis and Design

Have a question? Please contact Rod Mills or Kelly Crane

Aerial Surveys

Aerial Survey Benefits

Ensign Engineering has the capability and authorization from the FAA (Section 333 and Part 107) to perform flights for aerial survey using Unmanned Aerial System's (UAS) or drones. As of April 2016 Ensign is currently the only commercial survey and engineering company in the state of Utah that has these Federal Exemptions and UAS authorizations to conduct Drone Aerial Mapping.
The amount of data that can be collected with drones is astounding. With high-definition, high-accuracy (usually 1-3", but in most cases better than 0.1' horizontal and vertical) orthomosaics to 3D modeled buildings. Whatever your surveying and mapping needs are, we can provide it to you.

Super High Resolution Orthomosaic

Super High Resolution Orthomosaic

Possibly one of the most beneficial products of aerial survey is the super high resolution Orthomosaic. Not only can you zoom into the ortho and see incredible detail, you can also use to use this data to overlay onto less accurate and detailed maps.
Also, another benefit of an ortho is the correct perspective. If you take two pictures next to a building at different angles, then that can skew the perspective and make it difficult to pull measurements from the data. With an Orthomosaic it corrects for that perspective giving you accurate data from a top-down perspective.
To download an example ortho of Dixie State University, click here. Warning: File size is very large(1.11 gig.)

Colorized Elevation Map

Colorized Elevation Map

Easily see changes in elevation to allow for accurate planning.

Contours

Contours

This data can easily be imported into your engineering application for use with estate planning, road contruction, elevational data, etc.

Near-Infrared

Near-Infrared

Near-infrared allows us to see plant growth and the healthyness of vegitation. This platform is perfect for farms or campuses to evaluate quickly where they need to spot treat with fertilizer or pest control.
To download an example near-infrared image of Dixie State University, click here. File size: 120 MB.

3D Point Cloud

3D Point Cloud

Similar to the output of a lidar scanner with accuracies of up to 1-3 inces, we can gain measurements from any of the millions of points from the project. As every point is coordinated, distances can be measured between points in AutoCAD™. Quick, complete surface geometry is safely and accurately captured.
The 3D point cloud can be used with the appropriate software to view, pan, zoom, and rotate in 3D and obtain measurements from point to point instantly. With additional post-processing and laser scanning services, the raw data can be translated into accurate 2D or 3D AutoCAD drawings to be utilized for 3D visual walk-through and 2D or 3D design, and can even be rendered further into a full 3D solid model.

3D Modeling

3D Modeling

With a point cloud you are able to produce 3D models of your subject that can be used for any number of applications like advertising, interactive media, 3D printing, etc.